Timber Garages

Wooden garages hand made to order

At Regency Timber Buildings we construct all our timber garages in house, to our usual high standards using 5Th Grade Scandinavian redwood. (not the cheaper 6th or whitewood)

We do not provide garages for anyone else, when you buy from us you are buying direct from the manufacturer at the best price possible.

Our walls are made from a 100mm x 38mm planed frames which are screwed together for rigidity.

We have various external cladding’s that can be applied to the walls. There is 3 different thicknesses of shiplap for a traditional look.  A Log lap cladding for a more contemporary look. Or for a more rustic outbuilding look we have a 32mm thick tanalised treated Feather edge boarding.

The roofs are tongue and groove boarded supported with roof trusses throughout the entire roof. They come with high quality 3mm thick garage grade roof felt as standard.

The roof covering can be upgraded if required to-
Felt roof shingles
Corrugated onduline
Steel box profile roofing

We offer an optional assembly service for all of our garages. We do not outsource this to a third party we install all of our own buildings with our trained fitters.

We can insulate your building once the main structure has been assembled and to compliment this we can offer double glazed joinery manufactured windows with sill and draught excluders.

We do not buy in any mass produced products from other suppliers, all our garages are made in our factory based between Chester and Wrexham.

Our buildings are hand painted with cuprinol ultimate as standard which has a choice of 6 colours.
We  also offer tanalised treated boarding on request (tanalised treated buildings including the featheredge boarded ones are not hand painted as they are already treated with Tanalith E and come in a light green colour).

Timber garages are a cheaper and more attractive alternative to concrete or brick and have better natural insulation, they are therefore inherently less prone to condensation.
We recommend that the outer walls of  sit on a single course of bricks on top of a concrete base. A base plan will be sent out for all orders before delivery takes place.

We have standard sizes available and also a made to measure bespoke service. Side personnel doors, up and over or electric roller doors also opening windows can all be added to your building.

If you need your building to be below 2.5m overall height because of planning restriction we can accommodate this just give us a call we will be happy to help.

We can also make your garage with a mono pitch pent style roof.  If you prefer a garage with this design this will keep the overall height to a minimum.

We  can make to almost any size on request (up to 20ft wide or 6.1m).

Erection is available to most areas of the UK, north south east west. Please contact us for a quote if you can’t find your delivery area on our price list.

If you would prefer to erect the building your self we have detailed fitting instructions with step by step photographs.

All quoted timber sizes are nominal before machining finished sizes will be approx 3mm less than that quoted.

If you require a bespoke wooden garage please call 01948 830460 or email us using the contact form above with your specifications, I am sure we will be able to help with your needs.